Instruction Manual
2
DIN Rail MountingAttach the included DIN Rail brackets (one per side) using the provided screws to the
top DIN Rail screw hole (marked in the above diagram), and clip to your DIN Rail
Load Default Settings / System Reset ButtonLoad Default Settings
Press and hold this button for more than 3 seconds, then release to load the factory
default settings.
IP address: 10.1.1.1
Subnet Mask: 255.0.0.0
Login ID / Password: admin
System Reset
Press and hold this button for more than 10 seconds, then release to reboot the device
(maintains conguration settings)
LED IndicatorsLED Name Status Description
Ready On Power is on and the device is ready.
O Power is o or the device is not ready.
Link/Act
On UTP is link.
Blinking UTP Tx/Rx is activity.
O UTP is not link.
Tx/Rx
Blinking RS-232 port is transmitting or receiving
data.
O No data is transmitting or receiving in
RS-232 port.