Web Console Operation

Enter the IP address you have set for the NETRS2321P device into your web browser address bar (default IP: 10.1.1.1) and you will prompted to login with your user ID and password (Default: admin/admin).

After a successful login, you will see Administrator, TCP Mode, UDP Mode, UART, and Reset Device selections in left frame of the web console - the following sections will describe their function.

Administrator

Under the ‘Administrator’ heading, you will be able to set/change the device password, configure the networking parameters, display the current firmware version, load the factory defaults, and perform any future firmware upgrades.

Authentication

In this page, you can change login ID and Password. The NETRS2321P device supports a maximum of 15 characters for password, only alphanumeric characters are allowed (“0-9”,”a-z”,”A-Z”).

Press “Update” to store the data. Reset the device to take effect.

Instruction Manual

6

Page 10
Image 10
StarTech.com NETRS2321P manual Web Console Operation, Administrator, Authentication