Virtual COM Software Operation | StarTech.com NETRS2321P specs

Virtual COM Software Operation

The Virtual Com application lets you install and configure your NETRS2321P easily over the network. Five function groups are provided to ease the installation process, allow COM mapping, and provide monitoring and IP location server functions.

Configuration

Once the software is installed and you have searched the device on your network (outlined in Installation section), all NETRS2321P devices on the LAN should appear in the list of available devices.

Select the one you would like to adjust and click the Configure button. You will be prompted to enter your User ID and Password (Default: admin / admin)

Configure the device and press the OK button

Instruction Manual

14

Image 18

StarTech.com NETRS2321P manual Virtual COM Software Operation, Configuration

Contents

Port RS232 Serial over IP Ethernet Device Server FCC Compliance Statement Table of Contents Product Applications Front View Product OverviewTop View Rear View Load Default Settings Load Default Settings / System Reset ButtonLED Indicators System Reset RJ45 Ethernet Pin Assignments RS-232 DB9 Male Pin Assignment Introduction InstallationPackaging Contents Web Browser Method Broadcast Search Administrator AuthenticationWeb Console Operation System IP System Status Load default setting Firmware updateWeb TCP Mode Telnet Server / Client Server mode protect timeout CLI ModeClient mode inactive timeout Reverse Telnet Local Port UDP ModeMode Remote Address Parity Type Baud rateCharacter Bits Stop Bit Uart Memory Overflow count Reset DeviceHardware Flow Control Uart Fifo Overflow count Configuration Virtual COM Software Operation Server/Client TCP Mode only COM Mapping Remote Port Enable Control Connection TCP Server or Client OnlyIP Address Seconds for reconnection interval Product Applications Specifications Parity Technical Support Warranty Information Limitation of Liability