Hardware Flow Control
Set the flow control mode of UART interface as enabled or as none.
UART Memory Overflow count
Shows the number of overflow bytes in network buffer.
UART FIFO Overflow count
Shows the number of overflows counted in the UART RX buffer.
Delimiter
This sets the Character 1 and/or Character 2 to be used as the delimiter. When sending data from serial to TCP the data is first stored in the cache. When set, not until the value of character 1 or 2 is received from the serial side is the data released from the cache and sent to TCP.
Silent time - If there is no data sent or received for the number of milliseconds specified the connection is dropped.
The Drop Character drops the delimiter character of the serial port when sending to TCP, (the receiver doesn't display the character).
Reset Device
Pressing the “Reset” button will force the NETRS2321P to do system reset action.
Instruction Manual
13
