UDP Mode

When UDP mode is enabled, TCP mode will be disabled automatically. In UDP mode, the Local Port will be assigned to this device. You can list the remote connection IP and Port for up to 10 remote devices.

Once you have completed making changes, press "Update" to store the data. Reset the device to take effect.

Mode

Listen: When in UDP Listen mode, it can only receive remote UDP data.

Normal: When in UDP Normal mode, it can both receive and send UDP data to remote units.

Local Port

Assign the UDP port that this unit listens on.

Remote Address

The remote address table allows users to set several remote site IP addresses and ports. When sending data, the device will send UDP data to the IP addresses in the table.

Instruction Manual

11

Page 15
Image 15
StarTech.com NETRS2321P manual UDP Mode, Local Port, Remote Address