Chapter 5 Troubleshooting the Web Conferencing Installation
Server Connection Problems
Step 2 In the OS Image field, verify the operating system version.
Step 3 Click OK to close the MCS Version Utility.
Obtaining Additional Assistance
If there is a problem with a Windows service or the web server loses its connection, go to the
drive:\Program Files\Cisco Systems\MPWeb\datasvc directory and run Dcdiags.bat as soon as possible to generate a server log. All diagnostic information is stored in the Cisco Systems\MPWeb\Diagnostics directory.
Zip these files, and send them to your Cisco support representative for additional assistance.
Server Connection Problems
The web server must be able to connect to itself by using the hostname you configured on the Web Server administrative page. This is also the hostname used by end users to connect to this web server.
Connection problems are most likely caused by
The following procedure uses hostname.domain.com as an example. Replace hostname.domain.com with your web server’s actual FQDN.
To Resolve HTTP Connection Problems
Step 1 From the web server, use a web browser to connect to http://hostname.domain.com.
Step 2 If you receive an error message, add the following line to the C:\WINNT\System32\drivers\etc\hosts file:
127.0.0.1 hostname.domain.com
Step 3 Try to connect to http://hostname.domain.com again.
Meeting Room Connection Problems
If users are not able to access the full meeting room after upgrading the Audio Server from a previous release, it is possible that the Full Web Conferencing Ports setting on the Audio Server is incorrect. Perform the following procedure to configure the Full Web Conferencing Ports setting to match the number of web conferencing licenses available on your Audio Server.
To Configure the Full Web Conferencing Ports Setting
Step 1 Start MeetingTime and log in to the Cisco Unified MeetingPlace Audio Server.
Step 2 Click Administration > Configure.
Step 3 Click Server Configuration, then click Query.
Step 4 Click the value for Full Web Conferencing Ports and enter the number of web conferencing licenses purchased.
Installation and Upgrade Guide for Cisco Unified MeetingPlace Web Conferencing Release 6.x
|
|
| |
|
|
