Chapter 2 Installing Web Conferencing
Installation Tasks: Web Conferencing
One NIC enabled and configured with two IP addresses; | • Only utilizes one of the two NICs on the |
second NIC is disabled | system. |
| • The NIC is a single point of failure. |
| • This configuration is available for both HP |
| and IBM MCS server models |
| • To configure this option, perform the “To |
| Configure a Single NIC with Both IP |
| Addresses on the Cisco MCS Server” |
| procedure on page |
|
|
Both NICs enabled, one IP address per NIC | • Each NIC on the system is used, although one |
| NIC may be more heavily used than the other. |
| • Each NIC is a single point of failure. If either |
| NIC fails, Web Conferencing will be |
| unavailable. |
| • If the Web Conferencing server is connected |
| to a 100 MB/sec. network, the NIC capacity |
| may be exceeded in large meetings with |
| heavy application sharing. |
| • This configuration is available for both HP |
| and IBM MCS server models. |
| • To configure this option, perform the “To |
| Configure One IP Address per NIC on the |
| Cisco MCS Server” procedure on page |
|
|
Installation and Upgrade Guide for Cisco Unified MeetingPlace Web Conferencing Release 6.x
|
| |
|