37
Configures the multi-screen settings [Multi-screen setup]The cameras to be used for the multi-screen display can be registered on this page.
Refer to Operation Instructions for descriptions of how to display images on a multi-screen.
The following cameras are applicable for the multi-screen display. (as of December 2007)
WV-NF284 series, WV-NS202 series, WV-NP240 series, WV-NP1000 series, WV-NW470S series, WV-NP472, WV-
NS320 series, WV-NW484S series, WV-NS954 series, WV-NW964 series
[IP address]
Enter the IP address or the host name of the camera to
be used for the multi-screen. 4 cameras can be regis-
tered as a group and up to 4 groups (16 cameras) can
be registered.
When the HTTP port number for the camera had
been changed, enter as follows: "IP address of the
camera:port number", for example "192.168.0.10:
8080".
Number of characters for the IP address: 1 - 128
characters
Note:
When using the host name, it is necessary to config-
ure the DNS settings of the PC to be used for the
multi-screen display. (☞page 54)
[Camera title]
Enter the title of the camera. The entered camera title
will be displayed on a multi-screen.
Number of characters for the camera title: 0 - 20
characters
Note:
When selecting a 16 split-screen, some characters
of the camera title to be displayed may not be dis-
played.