Administrator’s Guide for the V500 System
Configuring Camera Settings
The Camera screen lets you specify camera settings.
To configure camera settings:
1.Go to System > Admin Settings > Camera.
2.Configure these settings:
Setting | Description |
|
|
Backlight | Specifies whether to have the camera automatically adjust for a |
Compensation | light background. Backlight compensation is best used in |
| situations where the subject appears darker than the background. |
|
|
Camera | Specifies how much light is let into the camera’s iris. A low number |
Brightness | allows in less light; a high number allows in more light. |
|
|
Power Frequency | Synchronizes the screen display with the local electrical power |
| frequency in order to eliminate video flicker. Typically, the default |
| setting is correct for your system and location. However, if your |
| system experiences video flicker, you may want to change the |
| setting: |
| • 60 Hz — Select this if the power frequency in your location is 60 |
| Hz, but you have a PAL system. |
| • 50 Hz — Select this if the power frequency in your location is 50 |
| Hz, but you have an NTSC system. |
|
|
4 - 6 | www.polycom.com/videodocumentation |