Administrator’s Guide for the V500 System
System Lights
The system lights are located on the front of your V500 system.
When the V500 system... | It means... |
|
|
Indicators are off | No power to the system. |
|
|
Green indicator blinks slowly | The system is sleeping. |
|
|
Green indicator flashes when you | The system is not in a call, and is receiving |
use the remote control | signals from the remote control. |
|
|
Amber indicator flashes when you | The system is in a call, and is receiving signals |
use the remote control | from the remote control. |
|
|
Green indicator is on | The system is ready to make a call. |
|
|
Amber indicator is on | The system is in a call. |
|
|
Red indicator is on. | The system microphone is muted. |
|
|
Network Interface Lights
The BRI network interface lights are located on the back of the system near the BRI connector.
When the BRI network interface... | It means... |
|
|
Indicators are off | • No power to the system, or |
| • The system is not connected to the network, or |
| • The system is not receiving a clock signal from |
| the network, or |
| • The system is restarting. |
|
|
Green indicator is on | The system is receiving a clock signal from the |
| network. |
|
|
Yellow indicator is on | The system is able to make a call. |
|
|
Green and yellow indicators are on | • The system is receiving a software update, or |
| • The system is operating normally. |
|
|
7 - 18 | www.polycom.com/videodocumentation |
