Administrator’s Guide for the V500 System
Setting Date, Time, and Location
You can update the system with regional settings, including the
To set the date, time, and location:
1.Go to System > Admin Settings > General Settings > Location.
2.Configure these settings:
Setting | Description |
|
|
Country | Specifies the country where the system is located. |
| Changing the country automatically adjusts the country code |
| associated with your system number. |
|
|
Language | Sets the language for the user interface. |
|
|
Country Code | Specifies the country code for the system location. |
|
|
Area Code Required | Specifies if an area code is required to place ISDN calls in the |
| specified country. |
|
|
ISDN International | Specifies the international code required for placing ISDN calls |
Access | from the system location to another country. |
|
|
Room Telephone | Indicates the telephone number of the room where the system is |
Number | located. |
|
|
3.Select 
and configure these settings:
Setting | Description |
|
|
Date Format and | Specifies your format preference for the date and time display |
Time Format | and lets you enter your local date and time. |
|
|
Daylight Saving Time | Specifies whether it is daylight saving time. |
|
|
Time Difference from | Specifies the time difference between GMT (Greenwich Mean |
GMT | Time) and your location. |
|
|
Display Time in Call | Specifies the time display in a call: |
| • Elapsed Time – Displays the amount of time in the call. |
| • Local Time – Displays the local time on the screen during a |
| call. |
| • Off – Time is not displayed. |
|
|
Time Server | Specifies connection to a time server for automatic system time |
| settings. |
|
|
4 - 16 | www.polycom.com/videodocumentation |
