Administrator’s Guide for the V500 System
Configuring the Global Directory
If you use the Polycom Global Management System, you can configure your system to use the Global Directory. The Global Directory provides a list of other systems that are registered with the Global Directory Server and are available for calls. The other systems appear in the Directory, allowing you to place calls to other users by selecting their names.
Configuring the Directory Server Settings
To configure the Directory Server settings:
1.Go to System > Admin Settings > Global Services > Directory Servers.
2.Configure these settings:
Setting | Description |
|
|
Global Directory | Specifies the IP address or DNS address of the Global Directory |
(GDS) | Server. You can enter up to five addresses. |
|
|
Register | Registers this system with the Global Directory Server. |
|
|
Password | Lets you enter the Global Directory password, if there is one. |
|
|
Display Global | Displays other registered systems in the Global Directory. |
Addresses |
|
|
|
Display Name in | Specifies whether to display the system’s name in the Global |
Global Directory | Directories of other registered systems. |
|
|
Save Global | Copies the Global Directory to this local system. |
Directory to System |
|
|
|
3 - 22 | www.polycom.com/videodocumentation |
