4.1.3 Management Setting Through Terminal Emulator
There are three items in the Main Menu, System Function, Configuration and SNMP Configuration.
4.1.3.1 System Function
There are three items in System Function menu, “Software Reboot, Factory Reset, and Image Update.
4.1.3.1.1 Software Reboot
After configuring, it needs to reboot the software setting in order to run the device properly.
4.1.3.1.2 Factory Reset
This function is to set the device back to the default setting in case of the messy setting.
4.1.3.1.3 Image Update
The section is to set the TFTP Server IP Address first, and the default address was set to “192.168.1.2”. The Image File can be updated by uploading the image file from the TFTP server.
Note: The content of the image file will write the whole firmware of the management module, please be sure that the image file is correct.
4.1.3.2 Configuration
To set the Software Reboot, Factory Reset and Image Update.
10