Chapter 2

UNPACKING AND INSTALL

This chapter provides unpacking and setup information for the Media Converter Chassis.

2.1 Unpacking

Open the box of the WMC-1600R and carefully unpack it. The box should contain the following items:

•One Intelligent Media Converter Chassis with one power supply installed

•One RS-232 Cable

•One Power Cord

•CD-ROM

•Rack mounting Kit

•This User’s Manual

If any item is found missing or damaged, please contact your local reseller for replacement.

2.2 Installation

The site where you place the chassis system may greatly affect its performance. When installing, take the following into your consideration:

As with any electric device, you should place the equipment where it will not be subjected to extreme temperatures, humidity, or electromagnetic interference. Specifically, the site you select should meet the following requirements:

-The ambient temperature should be between 32 and 104 degrees Fahrenheit (0 to 40 degrees Celsius).

-The relative humidity should be less than 90 percent, non?condensing.

-Surrounding electrical devices should not exceed the electromagnetic field (RFC) standards for IEC 801?3, Level 2 (3V/M) field strength.

-Make sure that the equipment receives adequate ventilation at the rear. Do not block the fan exhaust holes on the rear of the chassis.

-The power outlet should be within 1.8 meters of the chassis.

2.3 Deciding How to Install the System

We strongly suggest that you install the chassis first, as this is more convenient for you to install media converters into the chassis with ease. The accessories supplied in the product package include: rack-mount screws (8 pcs) and rack-mount brackets (2 pcs). This well-built chassis can be installed in the following ways:

3