Warm Start trap: to set the trap when the device had been reset (default = enable).

Authentication Fail Trap: to set the warning trap when the community name of the device and workstation are different (default = enable).

Power Fail Trap: to set the Power Fail Trap (default = enable).

Fan Fail Trap: to set the Fan fail trap (default = enable).

MC Plug-in Trap: to set the trap when a Media Converter Module has been plugged in (default = enable).

MC Pullout Trap: to set the trap when the Media Converter Module has been pulled out (default = enable).

MC Broken trap: to set the trap when the Media Converter Module was broken (default = enable).

MC Link up trap: to set the trap when a linking is connected (default = enable).

MC Link down trap: to set the trap when a linking is disconnected (default = enable).

MC Active Slot Xchg trap: to set the trap when there is a redundant function activated (default = enable).

MC Active Slot Lose trap: to set the trap when the redundant function is fail (default = enable).

4.2.2.4 Location Setting

Assign each slot’s location or name in order to remember in where each slot was connected.

18