System Name: to authorize the device system name.

Location: to show the WMC-1600R where it is located.

Refresh time: to set the refreshing time of the device through the web.

NOTE: After configuring the system device, need to press the save button to save the setting.

4.2.2.2 System Configuration

MAC Address: will show out the MAC address of the Management interface.

IP Address: to allocate an IP address for the Management interface, the default IP is “192.168.1.1”.

Subnet Mask: to set the Subnet Mask, the default is 255.255.255.0”.

Default Gateway: to set the gateway address, the default is “192.168.1.254”.

NOTE: After configuring the system device, need to press the save button to save the setting.

4.2.2.3 SNMP Configuration

Get Community Name: to get the device community name (default = public).

Set Community Name: to set the device community name (default = private).

Trap Community Name: to authorize the device trap community name (default = public).

Trap Host IP Address: to set the trap host IP address (same as monitoring station IP address).

Cold Start trap: to set the trap for rebooting the device (default = enable).

17