Broadband Router User Guide
Devices:
| Name | name of the device, e.g., My Bluetooth Device |
| |
|
|
|
|
|
| Type | type of the device, e.g., USB. |
| |
|
|
|
|
|
Device Properties: |
| |||
| Manufacturer | the name of the company that manufactured the device selected in |
| |
|
|
| the Devices section of this dialog box. |
|
| Firmware | the manufacturer's firmware version number. |
| |
| Revision |
|
|
|
| Device Status | indicates that the device is operating properly or that there is a |
| |
|
|
| problem/conflict. |
|
| Device Ad- | the Bluetooth Device Address (BDA or BD_Addr) programmed into |
| |
| dress |
| this device when it was manufactured. |
|
| HCI Version | the version number of the Bluetooth Specification that the Host |
| |
|
|
| Controller Interface complies with. |
|
| HCI Revision | the revision number of the Bluetooth Specification that the Host |
| |
|
|
| Controller Interface complies with. |
|
| LMP Version | the version number of the Bluetooth Specification that the Link |
| |
|
|
| Manager Protocol complies with. |
|
| LMP Sub |
| the |
|
| Version |
| Manager Protocol complies with. |
|
Advanced displays the Advanced Settings dialog box, which allows you to select the country code and transmission power settings. This option is not available on all systems
.
Hardware Advanced Settings Dialog Box
When available, this dialog box is reached from the Hardware tab of the Bluetooth Configuration Panel.
Depending on the country in which the hardware is sold and/or in which it will be used, the Advanced button may not be present.
From this dialog box you can set the:
Country Code: | North America, Europe (except France), |
| and Japan |
| France and China |
|
|
Maximum Transmission Power: | High |
| Medium |
|
|
| Low |
|
|
ŸClick the Apply button to implement the changes. A dialog box appears with notification that the Bluetooth device attached to this computer must be reset be- fore the change(s) will take effect.
ŸClick the Yes button to reset the Bluetooth device
20
