Installation
Hardware Installation
Note: The hardware installation should be only performed when the software is well installed.
Precaution
Before the installation, make sure the USB port exists in your computer and is enabled. To check this, go to My ComputeràControl Panel àSystem. Open the Device Manager tab. If the Universal Serial Bus controller device is found, it means your USB port is installed and enabled. If not, either no USB port is installed or the USB bios is not properly enabled. In this case, consult your computer dealer for USB sup- port.
Getting Hooked Up
1.Locate the USB host port of your system. Align the USB connector (the thinner end) of the USB adapter toward the USB host port, push evenly and steadily until it is seated.
2.Plug your
Connects to the USB host port
5
