Figure 3-5Port Status Screen
| Object | Description |
|
| Port | Indicate port 1 to port 24, and 2-module slot. |
| Enable | Display disable or enable on each port. |
| Link | Display current link status on each port. |
| Spd/Dpx | Display current speed duplex mode on each port. |
| Flow Ctrl | Display current flow control status on each port. |
Table 3-2Descriptions of the Port Status screen Objects
"%
Press 2 on your keyboard or use the "TAB" key to move the highlight to the Port Configuration and press “Enter” to access the screen of Port Configuration from the Main Menu screen (please see the figure3-4).
The screen of Port Configuration in figure 3-6 appears. Table 3-3 describes the Port Configuration objects. This menu allows you to change the port configuration of the Switch. The user can disable/enable each port and determine each port’s auto-negotiation, mode, speed, duplex mode, flow control. Use the “TAB” key to choose the <Edit> then press “Enter”. Then start to modify these settings. Use the “TAB” key to move the highlight to the object and press the “Space Bar” key to toggle back and forth between the options. After setup completed, press “ESC” key to return to Actions menu and use the “TAB” key to choose the <Save> for saving the current configuration.
| Figure 3-6Port Configuration Screen |
| |
Object | Description |
Port | Indicate port 1 to port 24, and 2-module slot. |
Enable | Allow user to disable or enable each port. |
Auto | Allow user to disable or enable Auto negotiation feature on each port. |
Spd/Dpx | Allow user to change the speed duplex mode on each port. |
Flow Ctrl | Allow user to disable or enable flow control on each port. |
Table 3-3Descriptions of the Port Configuration Screen Objects
Due to the hardware restriction, port #25/ port # 26 of the Switch does not allow to configure the speed and duplex mode. The operation of the two ports will base on the table below.
| Module-slot / Port #25, #26 | Module / Port Type | Speed / Duplex |
|
| MII-TP | 100Base-TX; RJ-45 | Auto-negotiation |
| | | |
| MII-GT / FGSW-2620PVS | 10/100/100Base-T; RJ-45 | Auto-negotiation |
| | | |
| MII-SC / MII-Sxx*1 | 100Base-FX; SC | Force 100 Full-duplex mode |
| MII-ST | 100Base-FX; ST | Force 100 Full-duplex mode |
| | | |
| MII-SA20/SB20 | 100Base-FX; | Force 100 Full-duplex mode |
| | Single SC | |
| MII-SX | 1000Base-SX; SC | Force 1000 Full-duplex mode |
| | | |
| MII-LX; MII-Lxx*1 | 1000Base-LX; SC | Force 1000 Full-duplex mode |
Table 3-4Operation of MII-series module
11
