Manuals / Brands / Computer Equipment / Switch / Planet Technology / Computer Equipment / Switch

Planet Technology FGSW-2402PVS 3.2.10.4 Reboot System, “Y”, "TAB, Press, Figure, Figure, Figure, “Enter”, Reboot System, “Reboot now? [Y/N] ”, Misc Configuration screen

1 50

Download 50 pages, 4.5 Mb

Figure 3-39Reboot Switch Screen

Figure 3-40Switch Console Login Screen

3.2.10.4 Reboot System

Press 4 on your keyboard or use the "TAB" key to move the highlight to the Reboot System and press “Enter” from the Misc Configuration screen (please see the figure 3-32).

The screen in figure 3-41 appears with message “Reboot now? [Y/N] ”. Press “Y” then the Switch will reboot, the screen in figure 3-42 appears. After power on completed, then the login screen of Switch in figure 3-43 appears.

Figure 3-41Reboot System Screen

Figure 3-42Switch Reboot Screen

Contents

Page FCC Warning CE Mark Warning Revision INSTALLATION 3. CONSOLE CONFIGURATION 4. WEB CONFIGURATION Page Page Model FGSW-2402PVS FGSW-2620PVS Switch Management Standards Conformance System Per 10/100Mbps port section 3.2.4 Port Configuration Note: Step5: Supply power to the Switch 19-inch Caution: 2.2.1 Desktop Installation Page admin Misc Configuration Item Description “ Enter” 1. Port Status section 2. Port Configuration 3. Trunk Configuration 4. VLAN Configuration Object Port Configuration “TAB” “Space Bar” “ESC” Note: ObjectDescription 3.2.6.1 Create a Port-BasedVLAN Group Add Add a PortBased VLAN Group "Space Bar Add a PortBased VLAN Group 3.2.6.2 Edit a VLAN Group 3.2.6.3 Delete a VLAN Group 3.2.6.4 Return to Main Menu “Operation completed successfully!” Bandwidth control 3.2.10.1 Advanced Switch Configuration 3.2.10.2 Password Setting 3.2.10.3 Reset System Default Setting 3.2.10.4 Reboot System 3.2.10.5 System Information 3.2.10.6 IP Configuration 3.2.10.7 Return to Main Menu 3.2.11.1 Advanced Switch Configuration 3.2.11.2 POE Port Status 3.2.11.3 Return to Main Menu “IP Address” Web IP subnet address http://192.168.0.100 “admin” Port Configuration: Trunk Configuration: VLAN Configuration: Port Mirroring Configuration: QoS Configuration: "Apply “Back” “Add NEW” “Delete” Disable RX & TX Disable QoS Priority High empty then Low High: Low=3:1 High: Low=5:1 High: Low=7:1 InRate OutRate Advanced Switch Configuration: Password Setting: Reset System Default Setting: Reboot System: System Information: Collision Retry Forever: MAC Table Auto-Aging: Disable, 150 sec, 300 sec, 600 sec MAC Table Hashing: CRC Hash and Direct Map Web Auto Logout Time: 5min, 10min, and 20min Password protection User Name New Password “OK” Page POE Ports POE Port Status: Page If attached device is: 100Base-TXport will set to: The Link LED is not lit Solution: Some stations cannot talk to other stations located on The other port Performance is bad Contact MDI MDI-X RJ-45Connector pin assignment The standard cable, RJ-45pin assignment Figure A-1: Straight-Throughand Crossover Cable