￿2 10/100/1000Mbps ports and 2 SFP interfaces (FGSW-2620PVS only)

￿Auto-MDI/MDI-X detection on each RJ-45 port

￿Prevents packet loss with back pressure (half-duplex) and 802.3x PAUSE frame flow control (full-duplex)

￿High performance Store and Forward architecture, broadcast storm control, runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth

￿6K MAC address table, automatic source address learning and ageing

￿4 Mbit embedded memory for packet buffers

￿Console and Web interface for Switch basic management and setup

￿Support up to 26 port-based VLAN groups

￿Support up to 7 Trunk groups, each trunk for up to maximum 4 port with 800Mbps bandwidth

￿Port mirroring allows monitoring of the traffic across any port in real time

￿Support QoS and bandwidth control on each port

￿Misc Configuration for Switch advanced configuration

￿￿" ￿￿￿ ￿￿￿#$￿￿￿%￿￿￿￿￿￿￿

ModelFGSW-2402PVS /FGSW-2620PVS

 

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

 

 

 

Network ports

24 10/100Base-TX RJ-45 MDI/MDI-X ports

 

Module slot

2 open slots for 10/100Base- TX, 1000Base-T and 100Base-FX,

 

(FGSW-2402PVS only)

1000Base-SX/LX fiber-optic interface

 

 

Gigabit ports

2 10/100/1000Mbps ports and 2 SFP interfaces

 

(FGSW-2620PVS only)

 

 

 

 

Console port

1 RS-232 DB-9 male

 

 

Dimensions

440 x 200 x 44 mm (1U height)

 

 

Weight

2.6 kg

 

 

Power Requirement

100~240 (±10%) VAC, 50-60 (±3) Hz

 

 

Power Consumption

30 Watts maximum / 102 BTU/hr maximum

 

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

 

 

 

Switch architecture

Store-and-forward

 

 

Address Table

6K entries, auto learning/ageing

 

 

Shared data Buffer

4 Mbit embedded memory for packet buffers

 

Flow Control

Back pressure for half duplex, IEEE 802.3x forfull-duplex

 

Packet Control

Runt & CRC filtering, Broadcast storm control

 

Switching Fabric

8.8Gbps

 

 

PoE power feeding

48VDC

 

 

PoE power consumption

260 Watts max. / 800 BTU

 

 

Switch Management

 

 

 

Port Configuration

Port disable/enable. Auto-negotiation disable/enable. 10/100Mbps full and half

 

 

duplex mode selection. Flow control disable/enable

 

 

PoE power supply enable/disable, power feeding priority

 

Port Status

Display each port’s disable/enable status, each port’s link status, and speed

 

 

duplex mode. Flow control status

 

 

 

PoE power consumption, power injection status

 

Trunk

7-trunk groups with up to 4-port per trunk

 

VLAN

26 Port-based VLAN groups

 

 

Port Mirroring

1 Mirroring port to monitor several mirrored ports. The monitor modes are

 

 

Disable, RX, TX, TX& RX

 

 

 

 

 

 

2