Port Configuration:

Allow user to disable/enable each port, Auto-negotiation disable/enable on each port, per port 10/100Mbps full and half duplex mode selection. Flow control disable/enable on each port. Explained on section 4.4

Trunk Configuration:

Allow user to enable the trunk function and configure. Explained in section 4.5

VLAN Configuration:

Allow user to enable the port-based VLAN function and configure. Explained in section 4.6

Port Mirroring Configuration:

Allow user to enable the port mirroring function and con figure. Explained in section 4.7

QoS Configuration:

Allow user to enable the QoS function and configure. Explained in section 4.8

Bandwidth Control:

Allow user to enable the bandwidth control function and configure. Explained in section 4.9

Misc Configuration:

Allow user to configure the advanced function. Explained in section 4.10

POE Configuration

Allow user to configure the POE function. Explained in section 4.11

Logout:

Allow user to logout the Switch Web interface. Explained in section 4.12

￿

"￿￿￿￿￿￿￿#￿￿￿￿￿

This menu displays each port’s status of the Switch. The Port Status in the screen will includes each port’s disable / enable and current link status, connection speed duplex mode and flow control status. The screen is as like figure 4-3 below.

Figure 4-3Port Status Screen

You can also click on the refresh button of your browser to get the latest status of the Switch.

"￿"￿￿￿￿￿￿￿￿%￿￿￿￿￿￿￿￿￿￿

This menu allows to setting port disable/ enable, Auto-negotiation disable/ enable, and speed duplex mode selection, flow control disable/ enable of each port. The screen is as figure 4-4.

29