PLANET Technology Corp.

GRT-101/401 User’s Manual

Connecting...

 

Download

 

Byte Transferred :

624641 bytes

Complete

 

Transfer Complete, Replace Now? (y/n): y

Writing flash.......................

OK!

Do you want to reboot? (y/n): y

Be sure to write the new image to NVRAM and immediately reboot the device to activate it. When you log back onto GRT-101/GRT-401 after the reboot, then you can use the “show system” command to verify the version of the new firmware that is active, and restore your configuration.

Note: All configurations will be cleared during the upgrading procedure. Make sure that you have a backup configuration file before you start the upgrading procedure. See section 3.17.1 Backup configuration for details.

-68-