PLANET Technology Corp.

GRT-101/401 User’s Manual

3.3.6 Administration

This session introduces security and simple network management protocol (SNMP) and time synchronous.

Security

For system secutiry, suggest to change the default user name and password in the first setup otherwise unauthorized persons can access GRT-101/GRT-401 and change the parameters.

There are three ways to configure GRT-101/GRT-401, Web browser, telnet and serial console.

Press Security to setup the parameters.

For greater security, change the Supervisor ID and password for the gateway. If you don’t set them, all users on your network can be able to access the gateway using the default IP and Password root.

You can authorize five legal users to access GRT-101/GRT-401 via telnet or console. There are two UI modes, menu driven mode and command mode to configure GRT-101/GRT-401.

Legal address pool will setup the legal IP addresses from which authorized person can configure the gateway. This is the more secure function for network administrator to setup the legal address of configuration.

Click Finish to finish the setting.

The browser will prompt the configured parameters and check it before writing into GRT-101/GRT-401.

Press Restart to restart the gateway

working with the new parameters and press Continue to setup other parameters.

-25-