PLANET Technology Corp. | ||
the cursor “ >> “ to bridge and press enter. |
| |
>> gateway | Default gateway |
|
static | Static bridging table |
|
You can setup default gateway IP via gateway command.
You can setup 20 sets of static bridge in static command.
3.8.5 Route
You can setup the routing parameters in route command. If the product is configured as a bridge, you do not want to setup the route parameters. Move the cursor “ >> “ to route and press enter.
>> static | Configure static routing table |
RIP | Configure RIP tool |
You can setup 20 sets of static route in static command.
3.8.6 LAN
>> address | LAN IP address and subnet mask |
attrib | NAT network type |
3.8.7 IP share
>> nat | Configure network address translation |
pat | Configure port address translation |
dmz | Configure DMZ host function |
For more NAT, PAT and DMZ information, review NAT/DMZ section.
3.8.8 DHCP
>> generic | Configure generic DHCP parameter |
fixed | Configure fixed host IP address list |
list | Show DHCP configuration |
For more DHCP information, review DHCP server section.