PLANET Technology Corp.

GRT-101/401 User’s Manual

parameters or press continue to setup another parameter.

Bridge

The bridge mode can be setup the static bridge parameters. Click Bridge to start Bridge configuration.

Press Add to add the static bridge information.

The screen will prompt the parameters that will be written in GRT-101/GRT-401. Check the parameters before writing in machine.

Press Restart to restart GRT-101/GRT-401 working with new parameters or

press continue to setup another parameter.

Route

If GRT-101/GRT-401 is connected to more than one network, it may be necessary to set up a static route between them. A static route is a pre-determined pathway that network information must travel to reach a specific host or network.

-20-