5.2.2Control Group
Option | Description |
Administrator | In default, the user name is “admin”. You can change the user name to a |
User Name | simply memorize name. |
|
|
Administrator | In default, the password is “admin”. Please change the password to IP |
Password | Power Manager in the first time configuration. That can prevent |
| unauthorized user access to IP Power Manager. |
|
|
BOOTP/DHCP | This is the parameter enabling or disabling the Boot Protocol (BOOTP) / |
Control | Dynamic Host Configuration Protocol (DHCP) process. These protocols |
| are used to obtain a dynamic IP address from a BOOTP / DHCP server. |
|
|
TFTP Upgrade | You can upgrade IP Power Manager via TFTP protocol when this option |
Control | enabled. |
|
|
Ping Echo Control | Enable/Disable the IP Power Manager to respond to Ping requests. For |
| protect IP Power Manager when they are connect to Internet. We will |
| suggest you enable this option to let your IP Power Manager stop |
| response the ping command. |
|
|
Input Phase | IP Power Manager will detect the input power phase to make sure the |
Detection | connected device can receive the correct power input. When input power |
| phase is reverse, IP Power Manager will display error code “E16” on |
| |
| you can disable this function temporally with this option. |
|
|
Telnet Control | This is the parameter enabling or disabling the terminal to the server |
| application (Telnet) control process. (e.g. telnet 192.168.1.1). The user |
| may configure the Telnet protocol to use a port number other than the |
|
|
| - 9 - |