Planet Technology IPM-8001, IPM-8002 6.3.3Date & Time, server, System Date, System Time, Set Manually, computer time, IP Power Manager, IP Power Manager, Synchronize with, Synchronize with NTP

6.3.3Date & Time

This page provides the appropriate options below to enable the IP Power Manager date/time to be changed in different methods. It will show the current date and time of the IP Power Manager. This can be changed to synchronize with a computer, and enquiry from a time server (NTP) or manually. For the system time, it should be counted automatically.

OptionDescription

Current Date and Time

IP Power Manager Current date of the IP Power Manager, format is dd/mm/yyyy.

System Date

IP Power Manager Current time of the IP Power Manager, format is hh:mm:ss.

System Time

Configure Date and Time

Set Manually	User can set the date and time with the following format: dd/mm/yyyy
	and hh:mm:ss.
Synchronize with	Select this option and click 'Set Value' to synchronize with the time
computer time	from the computer clock.

Synchronize with NTP You must configure the NTP server IP and select the correct timezone

serverto activate this option. After being configured to synchronize with NTP, the IP Power Manager will synchronize its time with the server periodically. If Daylight Saving Time enabled, the time will be one hour earlier than NTP server time.

- 26 -