
Option | Description |
Configure System |
|
System Name | This field allows the user to set the value in System name that is |
| defined in |
|
|
System Contact | This field allows the user to set the value in System manager (System |
| Contact) that is defined in |
| 31 characters. |
|
|
System Location | This field allows the user to set the value in System installation place |
| (System Location) that is defined in |
| setting. Size is 31 characters. |
|
|
SNMP Read | This field allows the user to set the read level community of SNMP or |
Community | to view the current setting. Size is 31 characters. |
|
|
SNMP Write | This field allows the user to set the write level community of SNMP or |
Community | to view the current setting. Size is 31 characters. |
|
|
History Log Interval | This field allows the user to set the polling time (in seconds) of the |
| Input, Output and EMD (if connected) information. The readings will |
| be stored in the history log. |
|
|
Administrator User Name and Password | |
Administrator User | You may enter the administrator user name, and the default value is |
Name | “admin”. Size is 31 characters. |
|
|
Administrator | You may set the administrator password, and the default value is |
Password | “admin”. Size is 31 characters. |
|
|
Confirm Administrator | Confirm the password again, and the value should be the same as |
Password | “Administrator Password”. Size is 31 characters. |
|
|
Control |
|
|
|
Reset to Default | All of the configurations will reset to the default value. |
|
|
Restart System | You may restart the system by click the button. |
|
|
6.3.2Multi-User
This page allows user to add or remove the IP Power Manager's
- 24 -