Input Voltage | Low threshold of input voltage. When input voltage is lower than this |
| Threshold Low (Volt) | value, IP Power Manager will take action specified in the "Inlet Events |
| Action" table. |
|
|
| Current Event of Inlet | Shows the associated event description when there is an event |
| occurred. If there is no event occurred, it shows "None". |
|
|
| Inlet Events Action |
|
| Input Voltage Over | Turn off selected outlets or digital outputs will occur when the input |
| Threshold High | voltage over high set point. |
|
|
| Input Voltage Under | Turn off selected outlets or digital outputs will occur when the input |
| Threshold Low | voltage under low set point. |
|
|
This page shows the outlet status and allows user to configure the settings.
OptionDescriptionStatus
Output Current (Amp) The nominal input currents in Amp.
| Power Status | When the power status is "Off", the color is Red. If power status is |
| "On", the color is Green. |
|
|
| Configure |
|
Outlet Name | Set the name of this outlet. |
|
|
Location | Set the name of the location of this outlet. |
|
|
| Power On Delay | Set power on delay time in seconds. The outlet will turn on after the |
(Seconds) | delay time. |
|
|
| - 18 - |