2. HARDWARE INSTALLATION

These products provide three different running speeds – 10Mbps, 100Mbps,1000Mbps. in the same device and automatically distinguish the speed of incoming connection.

This section describes the hardware features of POE-152S. Before connecting any network device to the POE-152S, read this chapter carefully.

2.1 Before Installation

Before your installation, it is recommended checking your network environment. If there is any issue for your install a networked device where is very difficult to find a power socket for your AC-DC adapter, the POE-152S can work with POE-152 IEEE 802.3af Power over Ethernet Injector with an AC-DC adapter(DC 48V input). The POE-152S provide you a way to provide DC power for this Ethernet device conveniently and easily.

The10/100/1000Mbps speed duplex mode from Ethernet port of POE-152S depends on which Ethernet device attached.

￿Notice:

The POE-152 and POE-152S can be installed in pair. However, the use of third-party device is allowed if the device complied with IEEE 802.3af standard.

- 6 -