ZyXEL Communications 2304R-P1 manual CLI Command List, Prestige 2304 Support Notes

Prestige 2304 Support Notes

1.Trace LAN packet

2.Trace WAN packet

1. Trace LAN packet

1.1Disable the capture of the WAN packet by entering: sys trcp channel mpoa00 none

1.2Enable the capture of the LAN packet by entering: sys trcp channel enet0 bothway

1.3Enable the trace log by entering: sys trcp sw on & sys trcl sw on

1.4Wait for packet passing through the Prestige over LAN

1.5Disable the trace log by entering: sys trcp sw off & sys trcl sw off

1.6Display the trace briefly by entering: sys trcp brief

1.7Display specific packets by using: sys trcp parse <from_index> <to_index>

2. Trace WAN packet

1.1Disable the capture of the LAN packet by entering: sys trcp channel enet0 none

1.2Enable the capture of the WAN packet by entering: sys trcp channel mpoa00 bothway

1.3Enable the trace log by entering: sys trcp sw on & sys trcl sw on

1.4Wait for packet passing through the Prestige over WAN

1.5Disable the trace log by entering: sys trcp sw off & sys trcl sw off

1.6Display the trace briefly by entering: sys trcp brief

1.7Display specific packets by using: sys trcp parse <from_index> <to_index>

CLI Command List

The latest CI command list is available in release notes of every ZyXEL firmware release. Please go to ZyXEL public WEB site http://www.zyxel.com/support/download.php to download firmware package (*.zip), you should unzip the package to get the release note in PDF format.

124

All contents copyright (c) 2005 ZyXEL Communications Corporation.