Prestige 2304 Support Notes
Configure parameters that determine when Prestige will forward WAN traffic to the backup gateway using
SMT Menu 11.6-Traffic Redirect Setup.
Menu 11.1 - Remote Node Profile
Menu 11.6 - Traffic Redirect Setup
Active= Yes
Configuration:
Backup Gateway IP Address= 192.168.1.50
Metric= 14
Check WAN IP Address= 202.13.154.1
Fail Tolerance= 5
Period(sec)= 30
Timeout(sec)= 3
Press ENTER to Confirm or ESC to Cancel:
Key Settings:
Active |
| Press [Space BAR] and select Yes (to enable) or No (to disable) traffic redirect setup. |
|
|
|
Backup |
| The IP address of your backup gateway. Prestige automatically forwards outgoing traffic |
Gateway | IP | |
Address |
| to this IP address if Prestige's Internet connection terminates. |
|
| |
|
|
|
Metric |
| Enter a number from 1 to 15 to give your traffic redirect route a priority number. The |
| smaller the number, the higher priority the route has. | |
|
| |
|
| |
Check WAN IP | Configure a reliable server on Internet (for example, your ISP's DNS server address) for | |
Address |
| Prestige to check it's WAN connectivity periodically. If you leave this field as 0.0.0.0, |
| Prestige will check it's default gateway IP address instead. | |
|
| |
|
| |
Fail Tolerance | Specify the number of times your Prestige may attempt and fail to connect to Internet | |
|
| before triggering traffic redirect connection. |
Period |
| Specify the period that Prestige would check it's WAN connectivity. |
|
|
|
Timeout |
| Specify the seconds that Prestige would wait for a response from the reliable server. |
|
|
|
|
| 58 |
|
| All contents copyright (c) 2005 ZyXEL Communications Corporation. |
