ZyXEL Communications 2304R-P1 manual Equal

Prestige 2304 Support Notes

•Apply the first filter set 'NetBIOS_WAN' to the 'Output Protocol Filter' in the remote node setup.

Configure the second filter set 'NetBIOS_LAN' by selecting the Filter Set number 2.

•Rule 1-Source port number 137, Destination port number 53 with protocol number 6 (TCP)

Menu 21.2.1 - TCP/IP Filter Rule

Filter #: 2,1

Filter Type= TCP/IP Filter Rule

Active= Yes

IP Protocol= 6 IP Source Route= No

Destination: IP Addr= 0.0.0.0

IP Mask= 0.0.0.0

Port #= 53

Port # Comp= Equal

Source: IP Addr= 0.0.0.0

IP Mask= 0.0.0.0

Port #= 137

	Port # Comp=	Equal
TCP Estab= No
More= No	Log= None
Action Matched= Drop
Action Not Matched= Check		Next Rule
Press ENTER to Confirm or		ESC to Cancel:

•Rule 2-Source port number 137, Destination port number 53 with protocol number 17 (UDP)

Menu 21.2.2 - TCP/IP Filter Rule

Filter #: 2,2

Filter Type= TCP/IP Filter Rule

Active= Yes

38

All contents copyright (c) 2005 ZyXEL Communications Corporation.