Prestige 2304 Support Notes
2. One rule for blocking all packets from this client
Menu 21.1.1 - TCP/IP Filter Rule
Filter #: 1,1
Filter Type= TCP/IP Filter Rule
Active= Yes |
|
|
IP Protocol= | 0 | IP Source Route= No |
Destination: IP Addr= 0.0.0.0 | ||
| IP Mask= 0.0.0.0 | |
| Port #= | |
| Port # Comp= None | |
Source: IP Addr= 192.168.1.5 | ||
| IP Mask= 255.255.255.255 | |
| Port #= | |
| Port # Comp= None | |
TCP Estab= N/A |
| |
More= No |
| Log= None |
Action Matched= Drop
Action Not Matched= Forward
Press ENTER to Confirm or ESC to Cancel:
Key Settings: |
|
Source IP addr | Enter the client IP in this field |
IP Mask | here the IP mask is used to mask the bits of the IP address given in the 'Source IP |
Addr=' field, for one workstation it is 255.255.255.255. | |
Action Matched | Set to 'Drop' to drop all the packets from this client |
Action Not Matched | Set to 'Forward' to allow the packets from other clients |
3. Apply the filter set number '1' to the 'Output Protocol Filter Set' field in the remote node setup.
A filter for blocking a specific MAC address
27
All contents copyright (c) 2005 ZyXEL Communications Corporation.
