ZyXEL Communications 2304R-P1 Example- A trace with system crashes, Prestige 2304 Support Notes

Prestige 2304 Support Notes

5.After all, if the Prestige crashes and you can do nothing, please send the above log back to us.

6.If the Prestige crashes and you are able to enter commands, please type 'atds' in debug mode to dump the log and send the log to us.

7.If the Prestige does not crash but just can not dial out, please capture the following further log and send us the log.

ƒsys trcp sw off (turn off packet trace)

ƒsys log disp i (capture system error log)

ƒsys trcp parse (parse the trace in detail)

Example- A trace with system crashes

ras> sys trcp sw on ras> sys errctl 3 ras> poe debug 1 ras> dev dial 1

Start dialing for node <GPMI>...

poeNetCmdExe: chann poe0 event x420

poeChannDial: start session, peer<GPMI>

bdcastInit: pch poe0

poePut1SrvcName: '' len 0 host-uniq 31303030 len 4

putPoeHdr: ver 1 type 1 code x09 sess-id 0 len 12(x000C)

bdcastSendInit: l1.pktTx() failed, pch poe0 ch enet0

poePut1SrvcName: '' len 0 host-uniq 31303030 len 4

putPoeHdr: ver 1 type 1 code x09 sess-id 0 len 12(x000C)

###Hit any key to continue.###

$$$ DIALING dev=6 ch=0..........

poeI/C: ver 1 type 1 code x07 sessId x0000 len 274(x0112)

poeCtrlI/C: pkt len 274 poeGetTags() service-name service-name telstra service-name bpa

114

All contents copyright (c) 2005 ZyXEL Communications Corporation.