2.2 POE-152 and POE-152S, the IEEE 802.3af Injector and Splitter installation

1.Connect a standard network cable from “Ethernet+DC” of POE-152 to “Ethernet+DC” of POE-152S. The POE LED of POE-152 / POE-152S will light on continuance. The screen in Figure 1 appears.

From POE-152 or IEEE 802.3af

Power Supply equipment

Figure 1: Connection to POE-152 or IEEE 802.3af POE equipment

2.Connect the UTP cable in the package from “Ethernet” of POE-152S to the RJ-45 port of remote device.

3.Connect proper DC plug from “DC OUT” of POE-152S to remote device.

4.Power on the remote device and the LED indicator on POE-152S will remains on, the screen in Figure 2 appears.

Figure 2: Connection architecture over POE-152/152S

￿Notice:

1.The POE-152S only accept IEEE 802.3af power supply equipment, any other in-line power device sending power through UTP wire connects to POE-152S may cause the POE-152S malfunction.

2.Please ensure the output voltage is correct before applying power to remote device.

-7 -