HOW TO ATTACH A HUMIDIFIER
ATTACH A HUMIDAIRE 3i HUMIDIFIER
Please refer to the illustration in section E of the illustration sheet, and your HumidAire 3i manual.
The HUMIDAIRE 3i attaches to the front of the S8 ESCAPE to provide heated humidification. No other accessories are required for its use.
Notes:
a.Make sure the water chamber of the HumidAire 3i is empty before you attach or detach the humidifier.
b.Remove the connector plug on the S8 Escape (see section A of the illustration sheet) before you attach the HumidAire 3i. Reattach the connector plug firmly after you detach the HumidAire 3i.
STORING THE HUMIDAIRE 3i
Store the HUMIDAIRE 3i in the larger,
ATTACH A HUMIDAIRE HUMIDIFIER
Please refer to the illustrations in section I of the illustration sheet.
To connect your S8 ESCAPE to a HUMIDAIRE humidifier you need medium sized 21” (52 cm) air tubing.
1Fill the HUMIDAIRE water chamber and place inside the HUMIDAIRE. Connect the medium 21” (52 cm) and long 6’6” (2 m) air tubing
2Place the S8 ESCAPE on top of the HUMIDAIRE
Note: To avoid water spilling into the S8 ESCAPE, do not put it underneath the humidifier.
3Assemble your mask system and connect it to the free end of the long air tubing
4Plug the HUMIDAIRE power cord into a power outlet. Connect the S8 ESCAPE power cord to the socket at the rear of the S8 ESCAPE and plug the other end into a power outlet.
Please refer to the HumidAire User’s Manual for further details.
WARNING
! Make sure that the power cord and plug are in good condition and the equipment is not damaged.
The S8 ESCAPE is now ready for use with the HUMIDAIRE.
ENGLISH
HOW TO ATTACH A HUMIDIFIER 13