ResMed s8 Problem, Possible Cause, Solution, Card Error Remove Card, Settings Invalid Remove Card

Problem	Possible Cause	Solution
Display error message:	Component failure.	Call Service.
Exxxx
Call Service
(where xxxx defines
an error)
or
MOTOR FAULT
Call Service
or
UPLOAD LANGUAGES
Call Service
or
DATA LOST
Call Service
The following message	The Data Card is not inserted	Ensure that the Data Card is
is displayed on the	correctly.	inserted with the arrow facing up
LCD after you try to		and pointing towards the device.
update settings using		Ensure that the device is switched
the Data Card:		on and in standby mode before
Card Error		you insert the Data Card.
Remove Card

ENGLISH

The Data Card is only partly inserted.

You may have removed the Data Card before settings were copied to the S8 Escape.

Ensure that the Data Card is inserted into the slot on the Data Card module as far as it will go.

Reinsert the Data Card and wait

for the Settings Success Remove Card message to appear on the LCD.

The card is not a ResScan Data	Only use a ResScan Data Card.
Card.

The following message is displayed on the LCD after you try to copy data to a Data Card:

Card Error

Remove Card

The Data Card is not inserted correctly.

The card is not a ResScan Data Card.

Ensure that the Data Card is inserted with the arrow facing up and pointing toward the device.

Use a ResScan Data Card, as specified in this manual.

The following message is displayed on the LCD after you try to update the settings using the Data Card:

Settings Invalid

Remove Card

The identification details on the	Contact your clinician
Data Card do not match the	immediately.
details on your device.

TROUBLESHOOTING 27