ResMed s8 user manual

Models: s8

1 158
Download 158 pages 44.94 Kb
Page 16
Image 16
To connect your S8 ESCAPE to a ResMed PASSOVER humidifier you need medium sized 21” (52 cm) air tubing.

ATTACH A RESMED PASSOVER HUMIDIFIER

Please refer to the illustrations in section J of the illustration sheet.

To connect your S8 ESCAPE to a ResMed PASSOVER humidifier you need medium sized 21” (52 cm) air tubing.

1Fill the PASSOVER with water and connect the medium 21” (52 cm) and long 6’6” (2 m) air tubing (J-1).

2Place the S8 ESCAPE on top of the PASSOVER (J-2) and connect the free end of the medium air tubing to the air outlet (J-3).

Note: To avoid water spilling into the S8 ESCAPE, do not place it underneath the humidifier.

3Assemble your mask system and connect it to the free end of the long air tubing (J-4).

4Connect the power cord to the socket at the rear of the S8 ESCAPE and plug the other end into a power outlet.

Please refer to the ResMed Passover User’s Manual for further details.

WARNING

! Make sure that the power cord and plug are in good condition and the equipment is not damaged.

The S8 ESCAPE is now ready for use with the PASSOVER.

14

Page 16
Image 16
ResMed s8 user manual To connect your S8 ESCAPE to a ResMed PASSOVER humidifier you need medium sized 21” 52 cm air tubing