ResMed s8 user manual S8 MODULES

Models: s8

1 158
Download 158 pages 44.94 Kb
Page 21
Image 21
S8 MODULES

S8 MODULES

Note: Do not remove modules while power is connected to the S8 Escape.

Your S8 ESCAPE will have one of two modules fitted to the back: a blank module or a RESSCANData Card module.

USING A BLANK MODULE

Please refer to the illustrations in section F of the illustration sheet.

The blank module is a protective cover on the S8 ESCAPE. At times, you may wish to remove or attach this module, for example to use the serial adapter.

To remove the blank module, pull it off the back of the S8 ESCAPE to show the data communications port (F-1).

To attach the blank module, push the blank module onto the data communications port, until the module clicks into place (F-2).

Note: To protect the data communications port, always ensure there is a module attached to the device.

USING A RESSCAN DATA CARD MODULE

Please refer to the illustrations in section G of the illustration sheet.

The RESSCAN Data Card module is an accessory to the S8 ESCAPE. Use a RESSCAN Data Card with the Data Card module to collect data and update settings in the S8 ESCAPE. The module and card give your clinician convenient access to data about your treatment, and can provide you with new device settings from your clinician without you having to leave home.

ATTACHING THE MODULE

To attach the Data Card module, push it onto the data communications port at the back of your S8 ESCAPE until it clicks into place (G-1).

REMOVING THE MODULE

To remove the Data Card module, pull it off the back of the S8 ESCAPE (G-2).

Note: To protect the data communications port, always ensure there is a module attached to the device.

USING THE DATA CARD TO COLLECT DATA

Please refer to the illustrations in section H of the illustration sheet.

If your clinician needs to review your treatment, they will ask you to use the Data Card to copy data from your S8 ESCAPE, and to return the card to them. The Data Card will be provided in a convenient mailback envelope.

Data that is copied to a Data Card is still stored and available on the S8 ESCAPE. It takes approximately five seconds to copy data onto the Data Card.

ENGLISH

S8 MODULES

19

Page 21
Image 21
ResMed s8 user manual S8 MODULES