Planet Technology VIP-2100 Apply, Step 1:, Step 2:, Step 3:, Interface, Configuration

Interface Configuration

This section is going to setup the VoIP interface.

Step 1: Now we are going to setup the VoIP interface, click Configuration→ Interface to setup VoIP T1/E1 interface as figure 3.1-1.

Figure 3.1-1

Step 2: Double-click the installed interface (i.e Interface ID:0) to config it as figure 3.1-2.

Figure 3.1-2

Step 3: Modify the VoIP Interface parameters (i.e. IP Address, Protocol Tag, Subnet Mask and Default gateway) and apply the change by clicking Apply as figure 3.1-3.

Figure 3.1-3

VIP-2100 User’s manual - 18 -