o Check Parameter: Check parameter type (DNIS, ANI….)

o Digit From: Start digit from

o Digit To: End digit to

o Valid To: If the checked variable is success to validate

o Invaried To: If the checked variable is not success to validate

∙CIB: Call Information Branch

oInfo Type: Information type selection

-ANI: Calling Number

-DNIS: Called Number

-IP: IP Address or network (e.g. 192.168.0.0)

-PSTN: E1/T1 trunk and channel filter, format: interface id- trunk id- trunk start- trunk stop

-Prefix: The prefix to be match

0-1-17-31:

0:Interface ID (Always 0)

1:Trunk ID: 1

17:Start from B Channel 17

31:Stop from B Channel 31

oGoto: The component to run next

oCall Info Branch Line: ANI, DNIS, IP or PSTN goto setting

∙CIV: Call Information Validation, the user need setup the ACL for DNIS and IP TO take effect

oInfo Type: The infor type to be validation

VIP-2100 User’s manual

- 30 -