DNIS ACLStart Path: Configuration→Access Control→DNIS ACL

Figure 7.7-3

Parameters:

∙DNIS: Called party number used for filter

∙Access Mode:

o Allow: The called numbers are allowed for calls

o Disallow: The called numbers are disallowed for calls

☻Note: If in the system has both allowance and disallowance setup, the system will check allowance first and disallowance later. If only disallowance inputted all DNIS will allow to work except disallowed DNIS. If only allowance inputted, only those DNIS from allowance list will work.

User ACL

User ACL is used to store subscriber information when internal AAA is enabled.

Start Path: Configuration→Access Control→User ACL

Figure 7.7-4

Parameters:

∙User: User ID (0~9, *#)

∙Password: Password (0~9, *#)

∙Prepaid Point: Allowed prepaid point (When prepaid point is used, the system will deduct it automatically base on the rate setting.)

oPostpaid: postpaid user

∙Status:

oActive: User is activeled

oInactive: User is inactived

☻Note: 1. IP Authentication method must be set to “ internal AAA” to talk effect.

VIP-2100 User’s manual

- 69 -