o DM Parameter: Manipulation ANI or DNIS
o DM Group ID: Apply to DM group
∙
MakeCall: Make Call to PSTN or H.323/SIP site
oRoute Mode: Gatekeeper Call or P2P Call or PSTN…etc. (for PSTN incoming call, please select the Gatekeeper, P2P Call, or SIP Proxy call TA; for H.323/SIP incoming call, please select the PSTN call)
oTransport Address: When used for “H.323 TA” routing mode, the format used is “Ipaddr:port” (e.g. 192.168.111.50:1720)
oActive Disconnect: Enable PSTN user can actively disconnect the call or not
oActive Disconnect Digit: The DTMF digit to be tread as the disconnect trigger. Only can be used “Active Disconnect” enable
oActive Disconnect To: The next component when active disconnect is occurred
oInter Digit Timeout: The max time to in seconds to wait between two
digits.
oRTP Route: Voice RTP routing over
oFinish To: Successfully connect to remote site
oFailed Other to: The next component when default failed call o Failed Reason: Failed reason selection
o Failed To: When the failed reason occurred go to
- 32 - |