5.1.3Remote Management

You can specify a Host IP address that can perform remote management from Internet.

Parameters

Description

Host Address

The IP address of the host on Internet that will have management / configuration

 

access to the Broadband router. Leave it to 0.0.0.0 means anyone can access the

 

router’s web-based configuration from any remote location.

 

Click the Enabled box to enable the Remote Management function.

 

Note: When you want to access the web-based management from a remote site, you

 

must enter the router’s WAN IP address (e.g. 10.0.0.1) into your web-browser followed

 

by port number 8080, e.g. 10.0.0.1:8080 (see below). You’ll also need to know the

 

password set in the Password Setting screen in order to access the management

 

pages.

 

 

After the setup completed, please click “Apply” to save the settings. After press “Apply”, you will see a web screen to prompt you the configurations save successfully. You may refer to section 4.2.7 for the information of this screen.

- 22 -