port number, if you are familiar with the application protocol.
ProtocolPlease select the protocol TCP or UDP in the list.
After configuration complete, please click “Save” to save the settings. Or you may press “Reset” to clear the settings to enter again.
5.6NAT
Network Address Translation (NAT) allows multiple users at your local site to access the Internet via a single legal IP Address. NAT provides Firewall protection from hacker attacks and has the flexibility to allow you to map Private IP Addresses to Public IP Addresses for key services such as Websites and FTP. If NAT is disabled, all LAN side workstations must have legal IP addresses for Internet access. If the router is used for routing application, not for Internet access, the NAT function can be disabled.
Parameters | Description |
Enable/Disable | You can select to enable or disable the NAT function. After selected, please |
| click “Apply” to make the settings effect. |
|
|
After configuration complete, please click “Apply” button to save the configuration. Then you will see a screen to prompt you the settings are save successfully. You may press “Continue” for configure other settings or “Apply” to restart
- 44 -