| Note: You need to give your LAN PC clients a fixed/static IP address for the |
| Access Control rule to work properly. |
|
|
Client PC Service | You can block the clients from accessing some Internet services by checking |
| the services you want to block. |
|
|
Protocol | This allows you to select UDP, TCP or Both protocol types. |
|
|
Port Range | You can assign up to five port ranges. The router will block clients from |
| accessing Internet services that use these ports. |
|
|
Add | Click “Add” to save the settings. |
|
|
Reset | Click “Reset” to clear all fields. |
|
|
After configuration complete, please click “Apply” button to save the configuration. Then you will see a screen to prompt you the settings are save successfully. You may press “Continue” for configure other settings or “Apply” to restart
5.7.2URL Blocking
You can block users to access to some web sites by entering a full URL address or just keyword of the web site.
Parameters | Description |
Enable URL Blocking | Enable/disable URL Blocking. |
|
|
Add URL / Keyword | Fill in “URL / Keyword” and then click “Add”. You can enter the full URL |
| address or the keyword of the web site you want to block. If you find any typo |
| before adding it and want to retype again, just click "Reset" and the field will |
|
|
| - 55 - |