Note: You need to give your LAN PC clients a fixed/static IP address for

 

Virtual Server to work properly.

 

 

 

Private Port

This is the port number (of the above Private IP host) that the below Public

 

Port number will be changed to when the packet enters your LAN (to the

 

LAN Server/Client IP).

 

 

 

Type

Select the port number protocol type (TCP, UDP or Both). If you are unsure,

 

then leave it to the default both protocols.

 

 

 

Public Port

Enter the service (service/Internet application) port number from the Internet

 

that will be re-directed to the above Private IP address host in your LAN.

 

Note: Virtual Server function will have priority over the DMZ function if there

 

is a conflict between the Virtual Server and the DMZ settings.

 

 

 

Add

Fill in the "Private IP", "Private Port", "Type", “Public Port” and "Comment" of

 

the setting to be added and then click "Add". Then this Virtual Server setting

 

will be added into the "Current Virtual Server Table" below. If you find any

 

typo before adding it and want to retype again, just click "Clear" and the

 

fields will be cleared.

 

 

 

Reset

Click “Reset” will clear your current settings to allows you to enter again.

 

 

 

Current Virtual Server Table

 

 

 

 

Delete Selected

If you want to remove some items from the “Current Virtual Server Table”,

 

select the MAC addresses you want to remove in the table and then click

 

“Delete Selected”.

 

 

Delete All

If you want remove all items of the table, just click this button.

 

 

Reset

Click “Reset” will clear your current selections.

 

 

 

After configuration complete, please click “Apply” button to save the configuration. Then you will see a screen to prompt you the settings are save successfully. You may press “Continue” for configure other settings or “Apply” to restart WMRT-414 with new configuration.

- 47 -