Parameters

Description

Host Address

This is the IP address of the host in the Internet that will have

 

management/configuration access to XRT-D from a remote site. This

 

means if you are at home and your home IP address has been

 

designated the Remote Management host IP address for this router

 

(located in your company office), then you are able to configure this

 

router from your home. If the Host Address is left 0.0.0.0 this means

 

anyone can access the router’s web-based configuration from a remote

 

location, providing they know the password.

 

Click the Enabled box to enable the Remote Management function.

 

Note: When you want to access the web-based management from a

 

remote site, you must enter the router’s WAN IP address (e.g. 10.0.0.1)

 

into your web-browser followed by port number 8080, e.g. 10.0.0.1:8080

 

(see below). You’ll also need to know the password set in the Password

 

Setting screen in order to access the router’s web-based management.

Port

The port number of remote management web interface.

Enabled

Select “Enabled” to enable the remote management function.

Click <Apply> at the bottom of the screen to save the above configurations. You can now configure other advance sections or start using the router (with the advance settings in place)

26